This before photo shows a linear crack in the brick that extends from the window to the door.
The PolyLEVEL was injected at the base of this exterior wall in order to stabilize and lift the wall, causing the previously existing crack to close.
This same building also showed signs of settlement around another window and adjacent outlet box.
Once again, our crew was able to inject the PolyLEVEL in order to stabilize and lift this section of the wall, causing the crack to close.
This commercial brick building in Tallahassee, FL showed signs of settlement and was the perfect candidate for PolyLEVEL stabilization. In these photos, you can see that the cracks around the doors and windows closed back together. Even cracks at the bottom of the exterior wall were seamlessly fixed.