Commercial Helical Anchors & Tiebacks in Florida & Georgia
Screw Anchor and Soil Nailing in Florida and Georgia
Helical Anchors (also referred to as tiebacks) provide lateral stability to foundation walls and retaining walls with unbalanced earth pressures. Helical anchors can be installed with hand-held equipment, mini-excavators, skid steers, backhoes, track hoes, or crane-supported rigs so the anchors can be installed in almost any application. This versatility, along with the ability to immediately load and test the anchors, make helicals a convenient and economical solution for a wide variety of projects.
- Predictable capacity
- Helix blade configuration selected to achieve design embedment and capacity
- All-weather installation
- Can be installed in areas of limited or tight access
- Installation does not generate spoils
- Clean installation with no messy grout
- Load tests can be performed immediately following installation
- Available with optional hot-dip galvanizing for added corrosion protection
Helical anchors are a factory-manufactured steel foundation system consisting of a central shaft with one or more helix-shaped bearing plates, commonly referred to as blades, welded to the lead section. Extension shafts, with or without additional helix plates, are used to extend the anchor into competent load-bearing soils. Helical anchors are advanced (“screwed”) into the ground with the application of torque.
The terms helical piles, screw piles, helical piers, helical anchors, helix piers, and helix anchors are often used interchangeably by specifiers. However, the term “pier” more often refers to a helical foundation system loaded in axial compression, while the term “anchor” more often refers to a helical foundation system loaded in axial tension.
Helix Blade Geometry
Groundworks’ helical anchors feature blades manufactured with a true helix shape conforming to the geometry criteria of ICC-ES AC358. The leading and trailing edges of true helix blades are within a one-quarter inch of parallel to each other and any radial measurement across the blade is perpendicular to the anchor shaft. A true helix shape along with proper alignment and spacing of the blades is critical to minimize soil disturbance during installation.
Conversely, blades that are not a true helix shape are often formed to a ‘duckbill’ appearance. These plates create a great deal of soil disturbance and do not conform to the helix geometry requirements of ICC-ES AC358 since their torque to capacity relationships are not well documented.
Looking for a price? Get a no cost, no obligation free estimate.
word for it
They did everything they said they were going to do. Everything turned out wonderful; they met my expectations. We're very happy with the outcome.Pamela DeLand, FL
Alpha Foundation was professional from the beginning. From their sales rep, to the actual labor crew that came in and did the work. The crew was very informative a...Troy Orlando, FL
I have had many home repair jobs done over the years, by many contractors, in many locations in different states, and Alpha Foundations is the best one by far. Fir...Leonard St. Augustine, FL
I am extremely satisfied with the work done on my home. The work crews were professional, friendly and did a great job. My cement is level now and my lanai is secu...Marsha Gulf Breeze, FL
I chose your company after my talk with the design tech and assessment of his analysis of my problem and your solution. Also, the fact that he didn’t try to use ...Thomas Jacksonville, FL
The wealth of honesty and knowledge far exceeded my expectations. My appointment was completed successfully in a professional and timely matter. I now feel much be...William Ft. Lauderdale, FL
Alpha Foundations, is the company to call if you have foundation issues at your home or office. They are very knowledgeable, courteous, and professional. They are ...Roy Valdosta, GA